Wire Mesh Grips
Take the strain off of you while you're on the most demanding jobs. Flexcor® Wire Mesh Grips absorb and relieve direct pull, maintaining critical electrical connections in indoor and outdoor applications.
Product Categories
Go ALL IN with our full line of ready-to-install Industrial solutions
Tough, reliable electrical devices and cable management for your industrial processing plant
Filter Results
Selecting a filter will reload the page.
Category
Application Sector
Application Sector
Refers to the expected environment(s) or intended usage(s) for a product (e.g. Residential, Commercial, Industrial, etc.).
Brand
Brand
Choose from one of Legrand's brands.
Country of Origin
Type
Type
Value that Specifically Names the Type/the Application Value of the Closest Piece of Equipment/the Designated Type of Construction/the Generic Type/the Manufacturer Type Designation/the Specific Function/the Type of Application
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/2-in 45-Degree, .75-.87 OD Range]( "Aluminum Cord Grip, 1 1/2-in 45-Degree, .75-.87 OD Range")
Aluminum Cord Grip, 1 1/2-in 45-Degree, .75-.87 OD RangeCG15045875 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/4-in 45-Degree, .87-1.0 OD Range]( "Aluminum Cord Grip, 1 1/4-in 45-Degree, .87-1.0 OD Range")
Aluminum Cord Grip, 1 1/4-in 45-Degree, .87-1.0 OD RangeCG125451000 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 2-in Straight, 1.43-1.56 OD Range]( "Stainless Steel Cord Grip, 2-in Straight, 1.43-1.56 OD Range")
Stainless Steel Cord Grip, 2-in Straight, 1.43-1.56 OD RangeCGSS2001562 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Strain Relief Cord Grip, 2 1/2-in Straight, 2.06-2.19 OD Range]( "Stainless Steel Strain Relief Cord Grip, 2 1/2-in Straight, 2.06-2.19 OD Range")
Stainless Steel Strain Relief Cord Grip, 2 1/2-in Straight, 2.06-2.19 OD RangeCGSS2502188M Pass and SeymourStainless Steel Strain Relief Cord Grips are woven of stainless steel mesh with a Type 304 stainless steel body for corrosion resistance. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Watertight Nylon Strain Relief Cord Grip, 1/2-in NPT Straight, .500-.562 OD Range, Stainless Steel Mesh]( "Watertight Nylon Strain Relief Cord Grip, 1/2-in NPT Straight, .500-.562 OD Range, Stainless Steel Mesh")
Watertight Nylon Strain Relief Cord Grip, 1/2-in NPT Straight, .500-.562 OD Range, Stainless Steel MeshWT50500M Pass and SeymourNon-Metallic Cord Connectors are constructed of a durable, nylon material which offers excellent corrosion resistance, is lightweight, durable and ideal for use in damp environments. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Strain Relief Liquid-Tight Grips]( "Strain Relief Liquid-Tight Grips")
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Strain Relief Cord Grip, 1 1/2-in Straight, .87-1.0 OD Range]( "Stainless Steel Strain Relief Cord Grip, 1 1/2-in Straight, .87-1.0 OD Range")
Stainless Steel Strain Relief Cord Grip, 1 1/2-in Straight, .87-1.0 OD RangeCGSS1501000M Pass and SeymourStainless Steel Strain Relief Cord Grips are woven of stainless steel mesh with a Type 304 stainless steel body for corrosion resistance. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 3-in Straight, 2.44-2.63 OD Range]( "Stainless Steel Cord Grip, 3-in Straight, 2.44-2.63 OD Range")
Stainless Steel Cord Grip, 3-in Straight, 2.44-2.63 OD RangeCGSS3002635 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 1 1/2-in Straight, 1.12-1.25 OD Range]( "Stainless Steel Cord Grip, 1 1/2-in Straight, 1.12-1.25 OD Range")
Stainless Steel Cord Grip, 1 1/2-in Straight, 1.12-1.25 OD RangeCGSS1501250 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/4-in Straight, .68-.81 OD Range, Form Size 5]( "Aluminum Cord Grip, 1 1/4-in Straight, .68-.81 OD Range, Form Size 5")
Aluminum Cord Grip, 1 1/4-in Straight, .68-.81 OD Range, Form Size 5CG1258125 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Strain Relief Cord Grip, 1-in Straight, .81-.93 OD Range]( "Stainless Steel Strain Relief Cord Grip, 1-in Straight, .81-.93 OD Range")
Stainless Steel Strain Relief Cord Grip, 1-in Straight, .81-.93 OD RangeCGSS100937M Pass and SeymourStainless Steel Strain Relief Cord Grips are woven of stainless steel mesh with a Type 304 stainless steel body for corrosion resistance. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Nylon Strain Relief Cord Grip, 1-in NPT Straight, .562-.687 OD Range, Nylon Mesh]( "Nylon Strain Relief Cord Grip, 1-in NPT Straight, .562-.687 OD Range, Nylon Mesh")
Nylon Strain Relief Cord Grip, 1-in NPT Straight, .562-.687 OD Range, Nylon MeshCGN100562NM Pass and SeymourNon-Metallic Cord Connectors are constructed of a durable, nylon material which offers excellent corrosion resistance, is lightweight, durable and ideal for use in damp environments. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Strain Relief Cord Grip, 3-in Straight, 2.44-2.63 OD Range]( "Stainless Steel Strain Relief Cord Grip, 3-in Straight, 2.44-2.63 OD Range")
Stainless Steel Strain Relief Cord Grip, 3-in Straight, 2.44-2.63 OD RangeCGSS3002635M Pass and SeymourStainless Steel Strain Relief Cord Grips are woven of stainless steel mesh with a Type 304 stainless steel body for corrosion resistance. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 2-in Straight, 2.19-2.31 OD Range]( "Stainless Steel Cord Grip, 2-in Straight, 2.19-2.31 OD Range")
Stainless Steel Cord Grip, 2-in Straight, 2.19-2.31 OD RangeCGSS2002312 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 1-in Straight, .44-.56 OD Range]( "Stainless Steel Cord Grip, 1-in Straight, .44-.56 OD Range")
Stainless Steel Cord Grip, 1-in Straight, .44-.56 OD RangeCGSS100562 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/4-in 45-Degree, 1.25-1.38 OD Range]( "Aluminum Cord Grip, 1 1/4-in 45-Degree, 1.25-1.38 OD Range")
Aluminum Cord Grip, 1 1/4-in 45-Degree, 1.25-1.38 OD RangeCG125451375 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 2 1/2-in Straight, 2.31-2.44 OD Range, Form Size 7]( "Aluminum Cord Grip, 2 1/2-in Straight, 2.31-2.44 OD Range, Form Size 7")
Aluminum Cord Grip, 2 1/2-in Straight, 2.31-2.44 OD Range, Form Size 7CG25024387 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Strain Relief Deluxe Cord Grips, 2-1/2-in NPT, Straight Male]( "Strain Relief Deluxe Cord Grips, 2-1/2-in NPT, Straight Male")
Strain Relief Deluxe Cord Grips, 2-1/2-in NPT, Straight MaleCG1630 Pass and SeymourStrain Relief Deluxe Cord Grips, 2-1/2-in NPT, Straight Male -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 3/8-in Straight, .37-.43 OD Range]( "Stainless Steel Cord Grip, 3/8-in Straight, .37-.43 OD Range")
Stainless Steel Cord Grip, 3/8-in Straight, .37-.43 OD RangeCGSS38438 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 2-in Straight, 2.31-2.44 OD Range, Form Size 7]( "Aluminum Cord Grip, 2-in Straight, 2.31-2.44 OD Range, Form Size 7")
Aluminum Cord Grip, 2-in Straight, 2.31-2.44 OD Range, Form Size 7CG20024387 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Strain Relief Cord Grip, 1/2-in Straight, .43-.50 OD Range]( "Stainless Steel Strain Relief Cord Grip, 1/2-in Straight, .43-.50 OD Range")
Stainless Steel Strain Relief Cord Grip, 1/2-in Straight, .43-.50 OD RangeCGSS50500M Pass and SeymourStainless Steel Strain Relief Cord Grips are woven of stainless steel mesh with a Type 304 stainless steel body for corrosion resistance. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Cord Grip, 1/2-in Straight, .18-.25 OD Range]( "Stainless Steel Cord Grip, 1/2-in Straight, .18-.25 OD Range")
Stainless Steel Cord Grip, 1/2-in Straight, .18-.25 OD RangeCGSS50250 Pass and SeymourThe Pass & Seymour series of corrosion-resistant cord connectors feature a body and compression nut made of Type 304 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments. All stainless steel cord grips include an embedded Buna-N O-Ring. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1-in 90-Degree, .68-.81 OD Range]( "Aluminum Cord Grip, 1-in 90-Degree, .68-.81 OD Range")
Aluminum Cord Grip, 1-in 90-Degree, .68-.81 OD RangeCG10090812 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/4-in 45-Degree, .75-.87 OD Range]( "Aluminum Cord Grip, 1 1/4-in 45-Degree, .75-.87 OD Range")
Aluminum Cord Grip, 1 1/4-in 45-Degree, .75-.87 OD RangeCG12545875 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1 1/4-in 45-Degree, .56-.68 OD Range]( "Aluminum Cord Grip, 1 1/4-in 45-Degree, .56-.68 OD Range")
Aluminum Cord Grip, 1 1/4-in 45-Degree, .56-.68 OD RangeCG12545688 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Strain Relief Deluxe Cord Grips, 2-in NPT, Straight Male]( "Strain Relief Deluxe Cord Grips, 2-in NPT, Straight Male")
Strain Relief Deluxe Cord Grips, 2-in NPT, Straight MaleCG1440 Pass and SeymourStrain Relief Deluxe Cord Grips, 2-in NPT, Straight Male -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1/2-in 45-Degree, .12-.18 OD Range]( "Aluminum Cord Grip, 1/2-in 45-Degree, .12-.18 OD Range")
Aluminum Cord Grip, 1/2-in 45-Degree, .12-.18 OD RangeCG5045188 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Stainless Steel Liquid-Tight Connector, 1 1/2-in 90-Degree]( "Stainless Steel Liquid-Tight Connector, 1 1/2-in 90-Degree")
Stainless Steel Liquid-Tight Connector, 1 1/2-in 90-DegreeLTB15090SS Pass and SeymourRated IP68 and NEMA 4X, Stainless Steel Liquid-Tight Connectors offer corrosion resistance for the toughest environments. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Watertight Nylon Strain Relief Cord Grip, 3/4-in NPT Straight, .437-.562 OD Range, Stainless Steel Mesh]( "Watertight Nylon Strain Relief Cord Grip, 3/4-in NPT Straight, .437-.562 OD Range, Stainless Steel Mesh")
Watertight Nylon Strain Relief Cord Grip, 3/4-in NPT Straight, .437-.562 OD Range, Stainless Steel MeshWT75437M Pass and SeymourNon-Metallic Cord Connectors are constructed of a durable, nylon material which offers excellent corrosion resistance, is lightweight, durable and ideal for use in damp environments. -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage Selections
![Aluminum Cord Grip, 1/2-in 45-Degree, .31-.37 OD Range]( "Aluminum Cord Grip, 1/2-in 45-Degree, .31-.37 OD Range")
Aluminum Cord Grip, 1/2-in 45-Degree, .31-.37 OD RangeCG5045375 Pass and SeymourDeluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants.
Product Availability by Store Location
Hours
