radiant® 4-Button Digital Timer
RT2I radiant Collection
4-Button Digital Timer, Ivory is rated out of 5 by 25.
Never worry about leaving the lights or fan on, while also reducing energy costs, with the radiant® 4-Button Digital timer. Great to use with attic fans, bathroom and closet lights, heat lamps, and in spaces like basements or garages. Manually turn the light on or off at the paddle switch, or use the included buttons for preset auto-off times of 60, 40, 20 and 10 minute delays. With the convenience of automated control, timers are a great upgrade for garages, laundry rooms and more. Part of the radiant Collection, it features clean lines and smooth paddle action for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
- Works with a variety of light bulbs or fixtures, including: Incandescent, LED, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
- Automates control of lights for energy and cost savings. Also includes manual on/off through the paddle switch for added convenience.
- Lets you select a desired preset shut-off time, including 60, 40, 20 and 10 minutes.
- Installs easily in place of a standard light or fan switch, or older spring-wound timer.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- More color options available to fit any style.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
|Countries Of Origin||China|
|Product Line||Pass & Seymour|
|Connection||Back & Side Wired|
|Coil Voltage||120VAC @ 60Hz|
|Timing Range||10-60 minutes|
Rated 4 out of 5 by dh987 from Does it's job, and looks good doing it. I bought these for my bathroom fans, and my bathroom heat lamps. They do a great job and they are set apart from a lot of the competition as is not a large selection for timers for 60 minutes. Very easy to use and setup. My only complant is that the wiring that is provided to tie into the existing wires seems to be of lower quality, but the fact that they provide it as well as stripping the wires for you is very convientent.
Date published: 2018-07-16
Rated 5 out of 5 by Ptarmigan from Works great with Panasonic WhisperCeiling DC I bought this for a bathroom fan. The timer function works great and remembers previous setting. It works with the low-wattage Panasonic fans that don't behave well with some timers. Maybe it's because of the relay in it that clicks on and off. The small white light is perfectly sized and brightness for helping find the switch in a dark room. I don't want a switch to be lit up like a night light, or have garish colors, or to cast light on the room. I want the room to be dark when the lights are off. These are perfect.
Date published: 2020-08-26
Rated 5 out of 5 by RetiredinOK from Great features We installed this timer in our bathroom to the exhaust fan. Love the time feature on this, we go into the bathroom turn the exhaust fan on and we don’t have to worry about it running continuously. We use to forget and leave it on for hours. This solved are problem.
Date published: 2018-09-03
Rated 4 out of 5 by Okiemom from Bathroom must have!! Our home was caught between steamy showers with no exhaust fan or an exhaust fan running for 24 hours straight. The 4-Button Digital Timer was a total solution and will now save our bathroom from moisture damage and our electric bill from wasteful usage. Easy to use, aesthetic for the design-conscious and a simple DIY project. This Timer is a great choice and automatic solution.
Date published: 2018-07-19
Rated 1 out of 5 by John from Would be great if it was clear won’t work w some I guess switch not wired for this right. Turned on but then wouldn’t respond after I turned it off. I believe o wired it right but the user instructions are not helpful for troubleshooting
Date published: 2019-02-16
For my application, I'd like to use this device to open/close a set of signal contacts (that is, complete a continuity circuit, like an old-fashioned mechanical relay). There will be no current flowing through the contacts. Can the device do this?
This device has a relay output so in theory would work to meet your needs. In practice though relays need a slight amount of switching current to help keep the contacts clean. If there is zero current being switched I might question performance/longevity in this application.
Date published: 2020-09-14
I read somewhere that this switch controls, lights, ceiling & exhaust fans. Is that true? I’m on my 3 switch by you! All I want/need is a switch that control my ceiling fan w/ a light! Dimmer & Fan switch didn’t work per legrand rep. Will this work?
I would suggest contacting our Technical Support department so they can offer the correct product for your application. Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - firstname.lastname@example.org
Date published: 2020-09-14
Is the fan control independent of the light? In other words, I would like the light to go on or off manually and the fan to go off automatically. The switch I have now has four connectors plus the ground terminal.
The RT2 timer is a single control so if you're controlling and light and fan, they will both turn on and off together.
Date published: 2020-08-05
The Specifications states: Number Of Poles: Single Pole/3-Way Yes the instructions clearly state "Only connect the RT2 to a Single Pole Circuit. The RT2 is not suitable for 3-way switching. So, which is it?
The Radiant RT2 timer is single pole only and we will correct the website description to reflect that.
Date published: 2020-04-14
I want to use this to turn on outside can lights. I want them all night for safety. Right now i turn them on at night and forget to turn them off in the morning Whats the longest time setting they be set to? Thanks
The RT2 timer has a maximum time delay of 1 hour. The RT100 or RT200 programmable timers would work better for your application. The RT100 is manual ON - auto OFF https://www.legrand.us/radiant/search.aspx?q=rt100i The RT200 is auto ON - auto OFF https://www.legrand.us/radiant/search.aspx?q=rt200i
Date published: 2020-04-06
I have a dbl wall box with timer and also SPST light switch.The old timer had red, white wires-RT2 also has black wire. Curr wiring fm wall-black to lightsw trml1, white to trml2 and over to timer "line" trml. Red to timer "load" trml. How to connect RT2?
The correct wiring for the RT2 timer is: • Connect the green or non-insulated (copper) GROUND wire from the circuit to the GROUND terminal on the RT2. • Connect the power wire from the circuit (HOT) to the black wire on the RT2. • Connect the power wire to the lamp or fan (LOAD) to the red wire on the RT2. • Connect the NEUTRAL wires from the circuit to the white wire on the RT2. Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - email@example.com
Date published: 2019-12-03
will this timer function on a 24volt dc control circuit .......If not do you have one in the decor square style in brown?????/
All of the timers we currently have available are rated for 120VAC only.
Date published: 2019-10-07
I have one fan, controlled by 3 switches with neutral. Will this work in 2 locations. Third location is on/off switch.
The RT2BK Radiant timer is designed for single pole applications only.
Date published: 2019-08-23