Low Voltage (12-32VDC) 0-10V PIR Fixture
FSP-202
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
FSP-2x2 sensors provide multi-level control based on motion and/or daylight contribution. They control 0-10VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, are rated for wet and cold locations. Line and low voltage models are available, and choice of control modes simplifies sensor configuration.
Voltage
12 V
- 12 V
- 120 V
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Provides line voltage On/Off switching and 0-10VDC dimming control (FSP-212)
- Works with ballasts or LED drivers
- High or low trim fully adjustable from 1 to 10V
- Time delay from 30 seconds to 30 minutes
- Optional cut off delay
- Ramp up and fade down times (2 seconds; 10 seconds)
- Optional daylighting control
Specifications
General Info
| Product Line | Wattstopper | ||
| Color | White | ||
| UPC Number | 754182939626 | ||
| Country Of Origin | China | ||
| Product Series | FSP-2x2 | ||
| Features | Adjustable Time Delay, Flame Retardant, Impact Resistant, Light Level Sensor, Power Pack Required, Recyclable, UV Resistant | ||
| Installation Location | Ceiling, Fixture | ||
| Standard | UL, cUL, IP66 Rated, E101196, RoHS | ||
| Warranty Type | 5-Year | ||
| Type | Sensor |
Dimensions
| Product Width US | 1.9 in | ||
| Product Weight US | 0.1 lb | ||
| Product Volume US | 16.6 cu in | ||
| Product Depth US | 1.5 in | ||
| Product Height US | 2.4 in |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
| DesignLights Consortium Qualified System | Yes | ||
| Security | Yes | This product is ioXt certified |
Technical Information
| Operating Temperature Min | -40 °F | ||
| Has Battery | No | ||
| Number of Connections | 5 | ||
| Sensor Type | Daylight, Occupancy | ||
| Operating Temperature Max | 158 °F | ||
| Sensor Mounting Height | 8-40 ft | ||
| Sensor Technology | Passive Infrared (PIR), Photosensor | ||
| Input Voltage | 12 to 32 VDC | ||
| Indoor/Outdoor | Indoor | ||
| Mounting Type | Fixture Embedded, Snap-in, Threaded Collar | ||
| On Function | Auto On | ||
| Current Draw | 10 mA | ||
| Operating Temperature | -40°-158°F, -40°-70°C | ||
| Wire Connection Type | Wire Terminal |
Resources
Cutsheet
Installation Instructions
Instruction Sheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Bazaarvoice SAP Hybris Integration Version 2.8.1